Setup for X4 AC2200 and the Netgear Nighthawk EX7300

Setup for X4 AC2200 and the Netgear Nighthawk EX7300

This configuration will undoubtedly meet your need for a WiFi network range extension with 2.2 Gbps speed. Despite being small, it can cover a 930 square meter area. Its powerful amplifiers and internal antenna give it a somewhat tapered shape.This setup provides a speedy network range at each corner of your workplace and home.

How to setup EX7300:

The manual way of installation-

• The extender need to turn ON
• Place this next to the router.
• The extender is now required electrical connection
• If the LED is green, connect the router-extender
• On your mobile gadget visit mywifiext.net
• As the installation process appears, go through it and join the nighthawk extender with the wireless network
• For a strong network, make sure the extender and router are close to one another.
• The configuration is now complete, so just connect your clients’ devices to this robust network.

WiFi protected setup (WPS) technique to installation

• Switch ON the extender EX7300
• Make sure the router and extender are in the same room.
• Electrically connect your extender
• Green LED need to glow now
• Switch ON the WPS on the extender
• Router -Extender connection will be good if the link status LED glows white
• Re-route your extender now
• Place your device in a low-network region, connect it to a fast network via an extender, and then enjoy.

If the router supports the 5GHz band, Nighthawk EX7300 extender will also try first to link with the same band support and if this not done it will further create so many technical issues during the Netgear extender setup process
For any technical support required during setup, just convey to our specialist person for a satisfactory solution.

FastLane setup procedures –

Increases network speed and performance
• The extender needs to connect with the router
• Browse the mywifiext.net page and fill login details
• Genie page will open, then go to ‘Do More’ and then ‘FastLane’
• Setup will reflect 02 choices-
• Your device + extender at 2.4 GHz: Extender + router at 5 GHz
• Your device + extender at 5 GHz: Extender + router at 2.4GHz
• The choice will be yours and then save

FIRMWARE updation for the extender EX7300:

Update the extender’s firmware software if any strange behavior or speed-related problems occur. So do not forget to update the firmware to the latest version and here you find the process of upgradation-
• Switch ON Nighthawk extender
• Then connect it with the router
• Open any web browser
• Enter after typing mywifiext.net and then login too
• On setting, option choose the firmware upgrade and check
• If required to upgrade, click yes to the further course of action
• It takes some time to complete

X4 AC2200 Netgear setup issues:

You may observe the following issues during the setup.
• Inability in Login
• Low network problem
• Password not accepting
• net, not processing
• Genie page continued to reflect
• Firmware not getting an update
• Genie page
• Red light and reset device problem
• Forgot password
• Inability to reach IP 192.168.1.250 and error message on miwifiextcom
• Unstable LED lights
• Internet connection not available in extender
• mywifi.ext.com not browsing
• MAC address issue

Troubleshooting faults occurred during setup:

• Ensure the correct supply of power available to X4 Netgear and wall plug is not broken
• There shouldn’t be any joints or broken cables anywhere.
• Reset it to achieve factory default settings
• Ensure your ‘Internet browser’ and ‘Firmware’ software to be the current version
• Avoid putting X4 extender near the home wall, aquarium, Ovens, Bluetooth instruments, metal make parts, etc.
• Make sure the right URL is entered into the web browser.
• If necessary, unplug the extension and reset it.

What are the technical features of X4 Extender:

• Device detail – AC 2200 EX7300
• Wireless Technology – 802.11ac
• Speed- 450 Mbps + 1733 Mbps
• WiFi Coverage – Upto 100ft
• WiFi bandwidth- Dual type 2.4 + 5 GHz

Key Aspects of Nighthawk X4 Extender:

• A device capable to enhance the range of router having 2.4 or 5 GHz WiFi signals
• Bandwidth speed of 2.2 Gbps
• 10,000 Square feet area coverage
• All WiFi router supported device
• Easily may be plugged in with the wall
• Increased performance in both the bands due to FastLane technology
• Internal antenna and high power amplifiers boost range
• MU-MIMO technology